STIHL MS 241 C-M Chainsaw 16″ Bar
Rated 4.7/5 based on 214 customer reviews

STIHL MS 241 C-M Chainsaw 16″ Bar

  • Product SKU: 1143 200 0273
  • Availability: In Stock
£630.00
Hurry! only 0 left in stock!
Ask about this product
Your message has been successfully sent to the store owner!
stihl in swansea



We wont be beaten on price! See our price promise here.

Compact professional chainsaw with M-Tronic.

The STIHL MS 241 C-M professional chainsaw is compact, agile and raring to go, with M-Tronic as standard. Fuel metering is controlled electronically and automatically adjusts to environmental conditions, to deliver optimal engine performance. Other great features include: an easy to clean HD2 filter, new STIHL professional anti-vibration system, chain tensioner, ‘patented’ captive nuts on the chain sprocket cover, easy access quick-lock bayonet fittings on one-piece shroud and memory function.

STIHL M-Tronic (M)
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

Long-life air filter system with HD2 filter
The STIHL MS 261 will win you over with a filter life that is five times longer than that of the MS 260. It is equipped with a long-life air filter system that removes coarse dirt particles by pre-separation. The new HD2 filter made from polyethylene filter material filters out the finest dust particles and is easy to clean. The PET-covered round filter cartridge can be replaced quickly and without tools. The radial seal minimises the amount of dirt in the carburettor. (similar to illustration)

Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

Decompression valve
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

Ematic chain lubrication system
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

Variable-displacement oil pump
Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.

Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

Captive nuts
When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.

Combi lever
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

Tool free filler caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.

stihl in swansea



We wont be beaten on price! See our price promise here.

Compact professional chainsaw with M-Tronic.

The STIHL MS 241 C-M professional chainsaw is compact, agile and raring to go, with M-Tronic as standard. Fuel metering is controlled electronically and automatically adjusts to environmental conditions, to deliver optimal engine performance. Other great features include: an easy to clean HD2 filter, new STIHL professional anti-vibration system, chain tensioner, ‘patented’ captive nuts on the chain sprocket cover, easy access quick-lock bayonet fittings on one-piece shroud and memory function.

STIHL M-Tronic (M)
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

Long-life air filter system with HD2 filter
The STIHL MS 261 will win you over with a filter life that is five times longer than that of the MS 260. It is equipped with a long-life air filter system that removes coarse dirt particles by pre-separation. The new HD2 filter made from polyethylene filter material filters out the finest dust particles and is easy to clean. The PET-covered round filter cartridge can be replaced quickly and without tools. The radial seal minimises the amount of dirt in the carburettor. (similar to illustration)

Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

Decompression valve
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

Ematic chain lubrication system
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

Variable-displacement oil pump
Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.

Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

Captive nuts
When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.

Combi lever
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

Tool free filler caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.

We provide Free UK delivery on all products except for our car batteries. We are based in the UK and all of our items are shipped from our store in Swansea. We have over 80,000 parts available for same day delivery and over 1,000 Hyundai products ready for collection or fast delivery. 

Please also allow 3 - 5 days for our free UK delivery option, depending on your location. Orders are often delivered well before the estimated arrival date and we will keep you updated along the whole process. Next day delivery is available from £6.99.

Tracking information will be provided with an order confirmation email. Sometimes tracking information may not appear for 1-3 days during which time your order is being processed. You may contact us at any time. We are here for you 24 hours a day, 7 days a week. You can contact us: 
Sales department: sales@hwbcarparts.com
Customer Services: aftersales@hwbcarparts.com
Trade/Wholesale: accounts@hwbcarparts.com
Telephone: 01792 277303
Live Chat: here

FREE UK DELIVERY 
All our products except car batteries are available for free UK delivery. 

FREE SAME DAY SWANSEA DELIVERY
Free delivery same day in Swansea when you spend over £20.

CLICK & COLLECT
Free click and collect from our store in Swansea. Simply make your purchase through the website and select the Click & Collect option at checkout.

UK NEXT DAY DELIVERY 
Next day delivery available in the UK for £6.99 if ordered before 11am. 
Please note Next Day may not always be available for our Hyundai range.


 DELIVERY TIME

Location *Estimated Shipping Time
England 3-5 days
N. Ireland 3-5 days
Scotland 3-5 days
Wales 3-5 days

 

Please note that if we are unable to temporarily or permanently deliver to your location we will contact you and/or cancel the order, issuing a full refund. Check your delivery options correctly at the checkout. 




RETURNS
Our returns policy lasts 30 days. If 30 days has gone by since you received your order, unfortunately we can’t offer you a refund or exchange. You must also contact us within 48 hours of receiving your order if you wish to return or exchange your item(s). Although our returns policy lasts 30 days it is important you contact us immediately (within the 48 hour period of delivery) or we have the right to cancel your refund at any time. 

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. 

To complete your return, we require a receipt or proof of purchase. 
Please do not send your purchase back to the manufacturer. 

Please note: for returns (not replacements), we cannot refund the delivery charge included in your order. Although we provide free delivery included in orders, your refunded amount will be the cost of the item and not the delivery charge. Upon request of a refund, we can provide an invoice identifying the delivery cost which will not be refunded. 

If your ordered item is a power product we will collect the item from you free of charge. 

To start a return
Simply visit our returns centre here.

There are certain situations where only partial refunds are granted (if applicable) 
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error 
- Any item that is returned more than 30 days after delivery 
- No contact was made to us within 48 hours of delivery with refund request

Refunds (if applicable) 
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. 
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 3-5 working days.

Late or missing refunds (if applicable) 
If you haven’t received a refund yet, first check your bank account again. 
Then contact your credit card company, it may take some time before your refund is officially posted. 
Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at aftersales@hwbcarparts.com or live chat. 

Sale items (if applicable) 
Only regular priced items may be refunded, unfortunately sale items cannot be refunded. 

Exchanges (if applicable) 
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at aftersales@hwbcarparts.com or live chat on our website.

Gifts 
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you. 

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return. 

Shipping 
To return your order, please contact us and we will provide further information on how to send it back to us. 

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund. 

Depending on where you live, the time it may take for your exchanged product to reach you, may vary. 

If you are shipping an item over £75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.